IoT

Approx. Rs 15,930 / PieceGet Latest Price

Additional Information:

Approx. Rs 22,000 / PieceGet Latest Price

ETS-IoT Kit – A Platform to Experiment Internet of Things

IoT trainer kit is an all-in-one prototyping platform for sensor-based IoT projects. It’s packed with state of the art sensor technology and ready-to-use software applications, capable of fulfilling all your IoT application needs. It contains inbuilt Raspberry Pi3 with all in one sensor platform to enable infinite IoT application prototype possibilities. 

 It also has a GPS module to add localization capability for the IoT projects. In addition to that, it consists of Pushbuttons, OLED display, and status LEDs to demonstrate or visualize IoT applications. 

Other highlights 

Technical Specifications:

• Quad-core ARM Cortex-A53 (Armv8-A architecture)
• Up to 1.2GHz Clock speed
• Broadcom Video Core IV
• 1GB LPDDR2 (900 MHz)
• MicroSDHC slot for onboard storage

Communication Interfaces

• 10/100 Ethernet
•  2.4GHz 802.11n wireless
•  Bluetooth Classic
•  Bluetooth Low Energy

On board Sensors

• Accelerometer
• Gyroscope
• Temperature
• Humidity
• Pressure

User interfaces

• 3x3 channel relay
• 3 RGB LED
• 2 Push button
• Buzzer
• OLED display

Ports

• UART
• SPI
• I2C
• 8 Analog I/O
• 31 GPIOs to interface external sensors
• 4 USB 2.0 port
• 3.5mm analog audio-video jack
• 6x5V Power supply
• 5x3.3V Power supply
• HDMI output
• Camera Serial Interface(CSI)
• Display Serial Interface(DSI)

External Sensors

• PIR sensor
• Ultrasonic sensor
• GAS sensor
• Air Quality Sensor
• IR sensor
• Fire sensor
• Light sensor
• Flex sensor
• Heartbeat sensor
• vibration
• servo motor
• Soil Moisture sensor
• Rain sensor

With the above specifications, a user could do countless IoT prototype and example applications. We at Enthu technology supports technically if required. This kit is suitable for anyone who wants to learn/Research/Prototype/Teach Internet of Things applications or projects.

It works with open source operating systems like Linux distributions/ Android Things or even with Windows 10 IoT core and it possible to connect this kit with most of the cloud domains easily. It is like a mini computer designed to explore the Internet of Things and core embedded systems applications.

Approx. Rs 8,614 / PieceGet Latest Price

LG01-N is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet, 3G or 4G cellular.

LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

LG01-N has rich internet connection method such as Wi-Fi interface, Ethernet port and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to Internet.

LG01-N can support the LoRaWAN protocol in single frequency and customized LoRa transmit protocol. Different from LG01-P/LG01-S, LG01-N use the Linux to directly control the sx1276/sx1278 LoRa module which increase the communication efficiency and simplify the software design.

LG01-N can be used to provide a low cost IoT wireless solution to support 50~300 sensor nodes.

Except LoRaWAN mode, LG01-N can support multiply working mode such as: MQTT mode, TCP/IP Client mode to fit different requirement for IoT connection.

LG01-N base on sx1276 solution which provide a low cost for your IoT network connection. Compare to the cost with normal SX1301 LoRaWAN solution. The LG01-N is only of its 1/4 or less cost. This make the LG01-N very suitable to set up small scale LoRa network.

Features:

· Open Source OpenWrt system

· Low power consumption

· Firmware upgrade via Web

· Software upgradable via network

· Flexible protocol to connect to IoT servers

· Auto-Provisioning

· Built-in web server

· Managed by Web GUI, SSH via LAN or Wi-Fi

· Internet connection via LAN, Wi-Fi, 3G or 4G

· Failsafe design provides robustly system

· 1 x SX1276/SX1278 LoRa module

· Limited support in LoRaWAN/ Support Private LoRa protocol

· Support up to 300 nodes

· LoRa band available at 433/868/915/920 MHz

· Max range in LoRa: 5~10 km. Density Area :>500m

Applications:

· Wireless Alarm and Security Systems

· Home and Building Automation

· Automated Meter Reading

· Industrial Monitoring and Control

· Long range Irrigation Systems

· GPS tracker,etc

· LoRaWAN Repeater

Specifications:

· Linux Side:

· Processor: 400MHz, 24K MIPS

· Flash: 16MB ; RAM: 64MB

Interfaces:

· 10M/100M RJ45 Ports x 2

· Wi-Fi : 802.11 b/g/n

· LoRa Wireless

· Power Input: 12V DC

· USB 2.0 host connector x 1

· USB 2.0 host internal interface x 1

· 1 x LoRa Interface

Additional Information:

Approx. Rs 20,060 / PieceGet Latest Price

The OLG02-EC25-E is an open source dual channel LoRa Gateway with GPRS. It lets you bridge LoRa wireless network to an IP network via WiFi & Ethernet,3G or 4G Cellular.The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.                            

OLG02 has WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG02 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via a network

Flexible protocol to connect to IoT servers

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Internet connection via LAN & WiFi, 3G or 4G

Failsafe design provides a robustly system

2 x SX1276/SX1278 LoRa modules

Full-duplex LoRa Transceiver

Two receive channels, and one transmit channel

Limited support in LoRaWAN/ Support
Private LoRa protocol

Support upto 300 nodes

LoRa band available at 865-867 Mhz

Max range in LoRa : 5 ~ 10km. Density Area:>500m

Applications

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

LoRaWAN Repeater

Specifications

Linux Side:

Processor: 400MHz, 24K MIPS

Flash: 16MB; RAM: 64MB

MCU/LoRa Side:

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78

Cellular 4G LTE (optional):

Quectel EC25-E LTE model (Click the link and choose the right model  when order)

Micro SIM Slot

Internal 4G Antenna + External 4G Sticker Antenna

Up to 100Mbps downlink and 50Mbps uplink data rates

Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE coverage

MIMO technology meets demands for data rate and link reliability in modem wireless communication systems   

Interfaces:

10M/100M RJ45 Ports x 2

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

2 x LoRa Interfaces

Additional Information:

Approx. Rs 5,500 / PieceGet Latest Price

LSN50 LoRa Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.LSN50 is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LSN50 wireless part is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

Approx. Rs 4,661 / PieceGet Latest Price

The LoRa GPS Shield is a expension board of LoRa™/GPS for use with the Arduino. This product is intended for those interested in developing LoRa™/GPS solutions.

In the LoRa part, the LoRa GPS Shield is based on the SX1276/SX1278 transceiver.The transceivers of the Shield feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range,interference immunity and energy consumption.

Approx. Rs 2,773 / PieceGet Latest Price

Dragion LoRaST IoT module featuring LoRa® technology is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.It is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LoRaST's wireless part is based on SX1276/SX1278 which allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

LoRaST's mcu part use STM32l0x chip from ST, STML0x is the ultra-low-power STM32L072xx microcontrollers incorporate the connectivity power of the universal serial bus (USB 2.0 crystal-less) with the high-performance ARM® Cortex®-M0+ 32-bit RISC core operating at a 32 MHz frequency, a memory protection unit (MPU), high-speed embedded memories (192 Kbytes of Flash program memory, 6 Kbytes of data EEPa0 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals via industrial standard M.2 (NGFF) pin interface.

Dragion LoRaST featuring LoRa® technology is an open source product, it is based on the STM32Cube HAL drivers, with customer application examples, user can program the IoT module via USART1 , USART2 or STLINK. The factory firmware supports LoRaWAN 1.0.2 specification and user can use AT Command to set up it and use for their project directly. User can re-compile the firmware to support different LoRaWAN Frequency, includes: EU868, AS925, AU915, CN470, CN779, EU433, IN865, KR920, US915.

Additional Information:

Approx. Rs 10,620 / PieceGet Latest Price

The OLG01 is an open source single channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

OLG01 has WiFi interface, Ethernet port, and USB host interface. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG01 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via the network

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Support WiFi AP, Client or Ad-Hoc(Mesh) mode

Internet connection via LAN, WiFi.

Failsafe design provides a robustly system

Arduino IDE compatible. Easy to program. 

LoRa band available at 865 - 867 Mhz 

Max range in LoRa : 5 ~ 10km

SMA connector for external LoRa antenna

12dBi WiFi directional antenna

Passive PoE Interface

Weatherproof enclosure

Applications

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

GPS tracker, etc

Specifications

Linux Side

Processor: 400MHz, 24K MIPS

Flash: 16MB ; RAM: 64MB

MCU/LoRa Side

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78

Interfaces

10M/100M RJ45 Ports x 2, Support Passive PoE

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

USB 2.0 host internal interface x 1

Additional Information:

Approx. Rs 3,304 / PieceGet Latest Price

The Dragino LoRa mini dev featuring LoRa® technology is the easy prototyping board for LoRa® technology.  It has a USB port which let the user to easily program module via Arduino IDE. It also has a pin slot for easy to connect sensors. 

LoRa Mini device is a small IoT development board offers a very compelling mix of long range, low power consumption, and secure data transmission. It is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.

LoRa Mini device is based on SX1276/SX1278 allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

LoRa Mini module featuring LoRa® technology is an Arduino compatible board based on ATmega328P, a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. LoRa Mini is also open source, the user can easily program it using the Arduino IDE.

Features

Base on ATmega328P + SX1276/78

Frequency Band: 865 - 867 MHZ 

LoRa™ Modem

FSK, GFSK, MSK, GMSK, LoRa™ and OOK modulation

Pre-load with Arduino Bootloader

Able to program via Arduino IDE

LoRa Specifications

168 dB maximum link budget.

+20 dBm - 100 mW constant RF output vs.

+14 dBm high-efficiency PA.

Programmable bit rate up to 300 kbps.

High sensitivity: down to -148 dBm.

Bullet-proof front end: IIP3 = -12.5 dBm.

Excellent blocking immunity.

Low RX current of 10.3 mA, 200 nA register retention.

Fully integrated synthesizer with a resolution of 61 Hz.

FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

Built-in bit synchronizer for clock recovery.

Preamble detection.

127 dB Dynamic Range RSSI.

Automatic RF Sense and CAD with ultra-fast AFC.

Packet engine up to 256 bytes with CRC.

Built-in temperature sensor and a low battery indicator.

MCU Specification

MCU: ATMega328P

Flash:32KB

SRAM:2KB

EEPROM:1KB

Clock Speed: 16Mhz

Absolute Maximum Ratings

VCC: 0.5v ~ 3.9v

Operating Temperature: -40 ~ 85°C

I/O pins: 0.5v ~ VCC+0.5V

Common DC Characteristics

Supply Voltage: 1.8v ~ 3.7v

Operating Temperature: -40 ~ 85°C

I/O pins: Refer ATmega328P datasheet

Power Consumption

Sleep Mode: 22μA

RX Mode: 7.2mA

TX Mode: 88mA@ 20dbm

Additional Information:

Approx. Rs 11,800 / PieceGet Latest Price

The OLG02 is an open source dual channel LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi & Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity.

OLG02 has WiFi interface, Ethernet port, and USB host port. These Interfaces provide flexible methods for users to connect their sensor networks to the Internet.

OLG02 runs Open Source OpenWrt system, the user is free to modify the source file or compile the system to support their customized applications.

Features

Open Source OpenWrt system

Low power consumption

Firmware upgrade via Web

Software upgradable via a network

Flexible protocol to connect to IoT servers

Auto-Provisioning

Built-in web server

Managed by Web GUI, SSH via LAN or WiFi

Internet connection via LAN & WiFi

2 x SX1276/SX1278 LoRa modules

Full-duplex LoRa Transceiver

Two receive channels, and one transmit channel

Limited support in LoRaWAN/ Support Private LoRa protocol

Support upto 300 nodes

LoRa band available at 865-867 Mhz

Max range in LoRa : 5 ~ 10km. Density Area:>500m

Applications

Wireless Alarm and Security Systems

Home and Building Automation

Automated Meter Reading

Industrial Monitoring and Control

Long range Irrigation Systems

LoRaWAN Repeater

Specifications

Linux Side:

Processor: 400MHz, 24K MIPS

Flash: 16MB; RAM: 64MB

MCU/LoRa Side:

MCU: ATMega328P

Flash:32KB, RAM:2KB

LoRa Chip: SX2176/78

Interfaces:

10M/100M RJ45 Ports x 2

WiFi : 802.11 b/g/n

LoRa Wireless

Power Input: 12V DC

USB 2.0 host connector x 1

2 x LoRa Interfaces

Approx. Rs 34,928 / PieceGet Latest Price

The LG308 is an open source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet, 3G or 4G cellular. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.

The LG308 is fully compatible with LoRaWAN protocol. It includes a SX1308 LoRa concentrator and a SX1276 LoRa transceiver, the sx1308 provides 10 programmable parallel demodulation paths and the SX1276 acts as TX channel so the SX1308 wont be block during TX. This combination provides higher capacity compare with a standalone SX1308 concentrator solution.

The LG308 has a built-in GPS module, the GPS module is connected to the SX1308 chip directly for TDoA LoRaWAN localization solution for ultra-low power or indoor solution.

Features:

• Open Source OpenWrt system
• Managed by Web GUI, SSH via LAN or Wi-Fi
• Emulates 49x LoRa demodulators
• LoRaWAN Gateway
• SX1276 base separate TX path
• 10 programmable parallel demodulation paths

Applications:

• Smart Buildings & Home Automation
• Logistics and Supply Chain Management
• Smart Metering
• Smart Agriculture
• Smart Cities
• Smart Factory

Specifications:

LoRa Spec:

• 1 x SX1308 + 2 x 1257 LoRa Transceiver 
• 1 x SX1276 LoRa Transceiver
• 1 x GPS module for LoRa localization

General Specification:

• 10M/100M RJ45 Ports x 2
• 1 x 2.4G Wi-Fi (802.11 bgn)
• 1 x USB host port
• 1 x Mini-PCIe Interface
• Power Input: 12v, 1A

Additional Information:

Approx. Rs 27,140 / PieceGet Latest Price

The LG308 is an open source LoRaWAN Gateway. It lets you bridge LoRa wireless network to an IP network via Wi-Fi, Ethernet. The LoRa wireless allows users to send data and reach extremely long ranges at low data-rates.

The LG308 is fully compatible with LoRaWAN protocol. It includes a SX1308 LoRa concentrator and a SX1276 LoRa transceiver, the sx1308 provides 10 programmable parallel demodulation paths and the SX1276 acts as TX channel so the SX1308 won’t be block during TX. This combination provides higher capacity compare with a standalone SX1308 concentrator solution.

The LG308 has a built-in GPS module, the GPS module is connected to the SX1308 chip directly for TDoA LoRaWAN localization solution for ultra-low power or indoor solution.

Features:

• Open Source OpenWrt system
• Managed by Web GUI, SSH via LAN or Wi-Fi
• Emulates 49x LoRa demodulators
• LoRaWAN Gateway
• SX1276 base separate TX path
• 10 programmable parallel demodulation paths

Applications:

• Smart Buildings & Home Automation
• Logistics and Supply Chain Management
• Smart Metering
• Smart Agriculture
• Smart Cities
• Smart Factory

Specifications:

LoRa Spec:

• 1 x SX1308 + 2 x 1257 LoRa Transceiver 
• 1 x SX1276 LoRa Transceiver
• 1 x GPS module for LoRa localization

General Specification:

• 10M/100M RJ45 Ports x 2
• 1 x 2.4G Wi-Fi (802.11 bgn)
• 1 x USB host port
• 1 x Mini-PCIe Interface
• Power Input: 12v, 1A

Additional Information:

Approx. Rs 4,661 / UnitGet Latest Price

LoRa GPS HAT is a expansion module for LoRaWan and GPS for use with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions.

LoRa GPS HAT is based on the SX1276/SX1278 transceiver.The add on L80 GPS (Base on MTK MT3339) is designed for applications that use a GPS connected via the serial ports to the Raspberry Pi such as timing applications or general applications that require GPS information.

The transceivers of the HAT feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.The Lora/GPD HAT can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

This board can calculate and predict orbits automatically using the ephemeris data (up to 3 days) stored in internal flash memory, so the HAT can fix position quickly even at indoor signal levels with low power consumption.With AlwaysLocate™ technology, the Lora/GPS HAT can adaptively adjust the on/off time to achieve balance between positioning accuracy and power consumption according to the environmental and motion conditions.The GPS also supports automatic antenna switching function. It can achieve the switching between internal patch antenna and external active antenna.Moreover, it keeps positioning during the switching process.

Approx. Rs 4,425 / PieceGet Latest Price

NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage. Battery life of more than 10 years can be supported for a wide range of use cases.

New physical layer signals and channels are designed to meet the demanding requirement of extended coverage – rural and deep indoors – and ultra-low device complexity. An initial cost of the NB-IoT modules is expected to be comparable to GSM/GPRS. The underlying technology is however much simpler than today’s GSM/GPRS and its cost is expected to decrease rapidly as demand increases.

NB-IoT Shield is an expansion board for Arduino to add NB-IoT technology. With NB-IoT Shield and Arduino, a user can study/evaluate and do POC for NB-IoT solution rapidly.

 The NB-IoT Shield is loaded with offshore NB-IoT module. It includes:

Nb-IoT Shield QB08 uses Quectel BC95 module. The module is designed for only use in NB-IoT network and difference suffix reference to different NB-IoT Band.

Features:

·         Support different NB-IoT Bands, can use world widely

·         Low power consumption

·         Wide area coverage

·         AT command to controlAuto support 3.3v or 5v Arduino board

·         Compatible with Arduino Leonardo, Uno, Mega2560, DUE… etc

Applications: 

·         Smart metering (electricity, gas and water)

·         Facility management services

·         Intruder and fire alarms for homes & commercial properties

·         Connected personal appliances measuring health parameters

·         Tracking of persons, animals or objects

·         Smart city infrastructure such as street lamps or dustbins

Connected industrial appliances such as welding machines or air compressors

Specifications:

• Output Power: 23dBm
• Sensitivity : -129dBm
• Operation Temperature: -40°C ~ +85°C
• Input Vcc: 4.5v ~ 5.5v
• Micro SIM Interfaces

Additional Information:

Approx. Rs 6,018 / UnitGet Latest Price

The Dragino LT series I/O Modules are Long Range Lora I/O Controller. It contains different I/O Interfaces such as analog current Input, analog voltage input, relay output, digital input, and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.

The LT I/O Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.

The LT I/O Controllers is aiming to provide an easy and low-cost installation by using LoRa wireless technology. 
The use environment includes: 
1) If the user’s area has LoRaWAN service coverage, they can just install the I/O controller and configure it connect the LoRaWAN provider via wireless. 
2) The user can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless.

Features:

STM32L072CZT6 MCU

SX1276/78 LoRa Wireless Chip

LoRaWAN Class A & Class C protocol

Optional Customized LoRa Protocol

Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

AT Commands to change parameters

Applications:

Smart Buildings & Home Automation

Logistics and Supply Chain Management

Smart Metering

Smart Agriculture

Smart Cities

Smart Factory

Interfaces:

3 x Digital Input 

3 x Digital Output

2 x Relay Output (5A@250VAC / 30VDC)

2 x 0~20mA Analog Input (res:0.01mA)

2 x 0~30V Analog Input (res:0.01v)

Power Input 0~24V

Additional Information:

Approx. Rs 2,773 / PieceGet Latest Price

Approx. Rs 1.2 Lakh / UnitGet Latest Price

Additional Information:

Approx. Rs 1,180 / UnitGet Latest Price

Approx. Rs 6,136 / UnitGet Latest Price

Additional Information:

Approx. Rs 2,360 / UnitGet Latest Price

Additional Information:

Approx. Rs 25,000 / PieceGet Latest Price

We bring forth our vast industrial experience and expertise in this business, involved in providing IOT Trainer Kit.

Features:

• All in one IOT training platform.
    On Board SMT sensors.
    Developed  More than 20 Application examples.

Convenient of use
• Expanded and open trainer
• Hassle-free functioning

Additional Information: